Huma FX Dreamline Power Plenum XL Set with Tuning Regulator

Huma-Air Power Plenum XL Set with Tuning Regulator For The FX Dreamline.

This Power Plenum XL Tune Set with regulator for the FX Dreamline can be placed into the pressure tube within a minute and replaces the original regulator.
It ads 30CC of volume of regulated air, what will give you the perfect base for a power tune of your FX Dreamline .
The set comes with our Huma-Air FX Dreamline regulator for maximum consistency over the total pressure range of the pressure tube and solves all the known issues of the original regulator.
(If you have previously bought a Huma-Air regulator for you Dreamline, the Power Plenum XL is backwards compatible with our previous models regulators and also available here without the regulator)

The benefits of the Huma-Air Power Plenum XL Set with Regulator for your FX Dreamline:
Achieve maximum available power due to the huge (30CC) regulated air chamber
Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations
A constant pellet speed over the full working pressure range.
Your rifle can work with a lower regulator pressure due to the higher efficiency
This set will give you a fantastic base for further tuning of your rifle

When you order your FX Dreamline Power Plenum XL Set with Huma-Air Regulator you will receive:
Your regulator pre-set on to your own wishes.
The Power Plenum with 30 CC of regulated air
A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
We will include a “Huma-Air Regulated” breech sticker.
Fitting instructions as pdf download.

Pressure settings of the FX Dreamline Power Plenum XL Set with Huma-Air Regulator: 
The regulator comes pre-set on the most common pressure setting, or we will adjust it according to your personal wishes. 
It is also equipped with a clear pressure scale label, so you can easily re-adjust or fine tune the pressure setting suitable to your wishes.
The pressure is stepless adjustable from 100-170 bar. 

Huma-Air Quality Control
Huma Air regulators are CNC produced out of high-grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program, and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
 
Fitting Instructions: Refer the correct model you have purchased from the below link.
https://www.huma-air.com/Fitting-instructions

Contact us if you need any customization and we shall be happy to get it done for you.

If you have any further query about the listed product you can use the above link to “Ask a Question”