-10%

Huma BSA R10 Tuning Regulator

This unique BSA R10 tuning regulator is specially designed as a "one on one" replacement regulator for the BSA R10 rifles and solves all your original regulator problems instantly.
The regulator is very consistent over the total pressure range of the buddy bottle and it can be screwed into the action within a minute.
Its fit’s all models.
The regulator is vented to the atmosphere, so no creeping up in power in long term.
Designed for a wide pressure range (70-150 bar).

The benefits of the BSA R10 tuning regulator made by Huma:
Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
A constant pellet speed over the full working pressure range.
It will give you a better shot count and a full flat shot string immediately.
Adding a regulator to your air rifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage

When you order one of our regulators you will receive:
Your regulator pre-set on to your own wishes.
A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment.
We will include a “Huma regulated” breech sticker.
Fitting instructions as pdf download.

Pressure settings of the Regulator:
The regulators come in the standard middle pressure range (MP: 70-150 bar output).
They come pre-set on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can easily re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control:
Huma regulators are CNC produced out of high-grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our Belleville springs are designed for critical applications to achieve the highest repeat accuracy.
This gives our regulators a repeat cycle less than 1% difference.

Fitting Instructions: Refer the correct model you have purchased from the below link.
https://www.huma-air.com/Fitting-instructions

If you have any further query about the listed product you can use the above link to “Ask a Question”