Huma Edgun Leshiy Tuning Regulator

Huma-Air Tuning Regulator and XL Plenum Set For The Edgun Leshiy

Huma pressure regulator for tuning your Edgun Leshey to the maximum performance and shot count.

This regulator replaces the original Leshey regulator and is an “one on one” replacement.
Just depressurize the pressure tube and unscrew it, remove the original regulator and replace it for the Huma regulator and you are finished.

The benefits of regulator made by Huma:
Higher accuracy of your air rifle due to the elimination of the pellet speed fluctuations.
A constant pellet speed over the full working pressure range.
Maximum use of the air volume due to our ultra-compact build.
It will give you a better shot count and a full flat shot string immediately.
Adding a regulator to your air rifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage.

Pressure settings of the Regulator:
The regulators come in the standard middle pressure range (MP: 70-150 bar output).
They come pre-set on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

When you order one of our regulators you will receive:
Your regulator pre-set on to your own wishes.
A pressure scale in bar on the regulator, for fine-tuning or re-adjustment.
Fitting instructions as pdf download.

Huma-Air Quality Control:
Huma regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our Belleville springs are designed for critical applications to achieve the highest repeat accuracy.
This gives our regulators a repeat cycle less than 1% difference.

Fitting Instructions: Refer the correct model you have purchased from the below link.
https://www.huma-air.com/Fitting-instructions

If you have any further query about the listed product you can use the above link to “Ask a Question”