FX Impact Custom High Flow Dual Hole Transfer Port and High Flow Pellet Probe

High flow set, dual hole transfer port with middle support bridge and high flow steel pellet/slug probe to get the maximum airflow out of your FX Impact. 
Up To 48% Larger Passage Area.

In cooperation with some of the leading FX tuners we have made a high flow transfer port with a middle support bridge which divides the transfer port into a dual hole port. 
This middle bridge makes sure the pellet or slug nose cannot fall into the enlarged transfer port hole but will be guided smoothly by the middle bridge into the barrel. 
This set also includes our high flow, steel black, pellet/slug probe. 
Together, this set will give the maximum airflow behind the projectile.  

We have modified the O-ring groove dimensions and locating notch of the transfer port to be compatible with both the newest rifles as well as the older versions from FX. 
Before tightening the grub screw that holds the barrel in the breech, make sure the barrel is adjusted properly so the magazine slides in and out smoothly.

Important Note: Compatible with M3 factory screw which locks the bolt in place.
If you need the bolt for compatibility with M4 factory screw, do specify in the comments when you place the order.

Contact us if you need any customization and we shall be happy to get it done for you.

If you have any further query about the listed product you can use the above link to “Ask a Question”