Huma Hatsan Galatian Tuning Regulator

Huma-Air Tuning Regulator for The Hatsan Galatian

For the Hatsan Galatian air rifle (also called Hammerli Pneuma) we have a pressure regulator available that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. 
So, no drilling in the tube and no creeping up in power during time.

For the real power lovers among us, we have also an XXL volume plenum available to tune your rifle to the maximum power with extra heavy pellets. 

The benefits of this Huma-Air, Hatsan Galatian tuning regulator are:
Higher accuracy due to the elimination of the pellet speed fluctuations
A constant pellet speed over the full working pressure range.
Maximum use of the air volume due to our ultra-compact build.
It will give you a better shot count and a full flat shot string immediately.
Adding a regulator to your air rifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage.
 
When you order your Huma-Air, Hatsan Galatian tuning regulator you will receive:
Your regulator pre-set to your own wishes.
A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment.
We will include a “Huma-Air regulated” breech sticker.
Fitting instructions as pdf download.
 
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high-grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program, and adjusted to the requested pressure. 
We only use high-end materials and our Belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
 
Pressure settings of the Hatsan Galatian Tuning Regulator
Your Hatsan Galatian tuning regulator comes pre-set on to the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so it's easy to re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Fitting Instructions: Refer the correct model you have purchased from the below link.
https://www.huma-air.com/Fitting-instructions

Contact us if you need any customization and we shall be happy to get it done for you.

If you have any further query about the listed product you can use the above link to “Ask a Question”