Nikko Match Mounts MK2 30mm Ring 9-11mm Base Low

Nikko Match Mk2 Rifle Scope Mount Rings - 30mm ring, LOW height profile, 9-11mm Airgun/Rimfire dovetail bases

Sale is for 2 - a pair - of mounts

Made of highest grade aluminium with matte black finishing and designed for all categories of rifles.

Four screws hold the upper part of the ring to the base which gives additional strength and ruggedness.

Recoil stop to minimize the impact of recoil.

Summary - 30mm tube - 9-11mm dovetail base fit (airgun and rimfire type)
LOW profile height with 8.8mm saddle to best suit up to approx. 36mm lens scopes.

Features:
Double hex screws to hold your scope firmly in place
Recoil stop pin
Reversible dove tail clamp that fits 9-11mm and 3/8-inch airgun and rimfire bases
Internal cushion tape prevents marking and damage
High grade aluminium anodised in matte black

Fitting basics:
Base: Fits 9-11mm width dovetail bases commonly found on airguns and rimfire.
Ring Diameter: 30mm tube scope
Height: Low - Distance from base of mount to bottom of ring (the saddle) is 8.8mm (0.34")
Scope Lens size suitability - based on scope being fitted onto a flat base rail and scope lens objective being flush to the gun body
Maximum outer scope case size = 47.6mm (8.8mm saddle + 15mm ring radius = 23.8 - x2)
This equates to an approx. maximum scope lens size of 34-38mm as most scope outsides add around 7-12mm.
Can be more than 7-12mm if flip up lens caps are being used so please take this into consideration.
However, if the end of the scope will hang over the gun barrel or if the rail is raised then larger lens scopes can be accommodated.

Summary Features:
Configuration: 2 Piece
Ring Size (Diameter): 30mm
Height: Low
Rail: 9-11mm (3/8"-11mm)
Fixings (Rail & Top Cap): Double Hex Screw
Internal Cushion: Yes
Retractable 'Recoil Stop' Pin: Yes

If you have any further query about the listed product you can use the above link to “Ask a Question”