Walther Rotex RM8 Regulator
The Custom "Walther Rotex RM8 Regulator" is finally here.
Have been working upon this for the last couple of months and we have an even more robust internal design.
Maintenance is way easier than before if you ever need to change the O rings in the future.
This regulator is all you need to get the Walther Rotex RM8 to higher power.
Will outlast the factory regulator and easy to work upon if you ever need to change the o rings.
No Assembly or machining skills required.
Just unscrew the existing regulator and replace the factory reg to our high-powered reg.
This will not fail you, as the internals are a complete upgrade from the factory regulator, and we can assure you of its performance.
Replacing O rings is now a breeze for maintenance, and you do not have to worry about not being able to fix the regulator.
The reg shoots 4 to 5 consistent mags at high power with the compact 200cc buddy bottle and a 232-bar fill.
We increased the plenum space by 10% from the factory setup as that’s the max we could go due to the gauge and filling design incorporated through the stock.
Also have set the reg to higher output than factory for the higher power.
The kit comprises off the following:
a) Completely Assembled and Tested Regulator with Valve Assembly and base collar as shown in picture.
b) Valve Guide Delrin Cap
c) Instructions Video.
These kit were designed for those who wanted to upgrade to higher power.
Also good for those who are having a hard time repairing their existing brass valves/ regulators for leaks or performance issues.
Be rest assured about the quality as they have been machined on CNC machines and each regulators are put to tests before being shipped.
The regulator is by default set at 150 bar, for the customers who want to use it on a UK Sub 12ft-lb versions the set pressure has to be lowered to 100 bar. Mention the same in the comments while placing an order.
Models: Works on both the .177 and .22 cal Walther Rotex airguns.
BE SURE TO READ THE DOC FOR INSTALLATION WHICH IS SENT ON EMAIL BEFORE YOU BEGIN THE UPGRADES.
Contact us if you need any customization and we shall be happy to get it done for you.
If you have any further query about the listed product you can use the above link to “Ask a Question”