-10%

Huma FX Royale Tuning Pressure Regulator

Huma-Air Tuning Pressure Regulator for The FX Royale
This Huma-Air FX Royale tuning regulator is specially designed as a "one on one" replacement for the factory regulator or can be used to make your unregulated Royale regulated.
It can be placed into the action within a minute.

Test Results:
We have tested the150 bar output regulator in .30 and it gave about 270 m/s speed with 44,75 gn pellets what is 78 ft/lbs - 105 J of power

The benefits of the Huma-Air tuning regulator for your FX Royale:
Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
A constant pellet speed over the full working pressure range.
Maximum use of the air volume due to our ultra-compact build.
It will give you a better shot count and a full flat shot string.
Adding a regulator to your air rifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage.

Pressure settings of the FX Royale Tuning Regulator:
The regulator comes pre-set on the most common pressure setting, or we will adjust it according to your personal choice.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting to your choice.

Huma-Air Quality Control:
Huma regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our Belleville springs are designed for critical applications to achieve the highest repeat accuracy.
This gives our regulators a repeat cycle less than 1% difference.

Fitting Instructions: Refer the correct model you have purchased from the below link.
https://www.huma-air.com/Fitting-instructions

If you have any further query about the listed product you can use the above link to “Ask a Question”