Airforce Gunpower Dead End Plugs for Custom Regulators and Custom Valves
If you need to shut the ports of our High Flow or Extreme Valve Assemblies when our Airforce Regulators are installed these dead end plugs would be handy.
Required when you have any of our below products in conjunction with our Airforce Regulators.
Hi-Flow Valve with Assembly
Hi-Flow Valve with Assembly Gen 2
Extreme-Flow Valve with Assembly Gen 2
Once you have upgraded to our Airforce Regulators, you will no longer need the gauges and fill nipple on the above valves as filling is done via the fill nipple on our regulators and they also have dual gauges which show you the fill pressure and the pressure in the plenum.
Contact us if you need any customization and we shall be happy to get it done for you.
If you have any further query about the listed product you can use the above link to “Ask a Question”
Related Products
Airforce Gunpower Angled Tank Adapter 1000cc Cylinders Short Version
Available Options: Angled Tank Adapter: Airforce Angled Tank Adapter 1Ltr Cylinders (Short Versi..
₹1,950 ₹4,130
Airforce Gunpower Valve Assembly NPT Dead End Plugs
Looking to shut the ports where the gauge and fill nipple install on the valve assembly, this is wha..
₹1,180
Airforce Gunpower Knurled Breech Black Knob V1
The custom breech knob replaces the MS hollow knob with rubber cover which screws onto the breech of..
₹1,000 ₹1,652
Airforce Gunpower Custom SS NPT Fill Nipple M3 Non Return Valve at Base
Tired of changing the seals for the Airforce Valves, we now have a solution for you. The “Airforc..
₹1,770
Tags: dead, end, plugs, for, airforce, regulators, and, custom, valves, gunpower/airforce