-10%

Huma BSA Goldstar Pressure Regulator (External)

Huma-Air regulator is specially designed for tuning your Bsa Goldstar target air rifle.

It’s very easy to install on your rifle, just depressurize the rifle, unscrew the pressure tube and replace the original regulator for the Huma tuning regulator and you are finished.

The benefits of this regulator over other regulators currently on the market:
Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
A constant pellet speed over the full working pressure range.
It will give you a better shot count and a full flat shot string immediately.
The regulator housing is made of extremely tough 42Cr steel.
Tested for a working pressure of at least 3x the working pressure of the rifle, for everyone’s safety.
It uses a long stroke piston that gives great consistency.
The regulator body and the housing are one piece, so no chance of the regulator moving inside the cylinder.
The one piece body and regulator housing also reduces the possibility of leaks.
The regulator piston is captive and does not need any adjustment or extra work to keep it in place.
DIY fitting is a real option for the most people.
High quality bluing, same colour as the original BSA pressure tube.
Adding a regulator to your air rifle will probably give you the biggest benefit in the tuning process.

When you order one of our regulators you will receive:
Your regulator pre-set on to your own wishes.
A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment.
We will include a “Huma regulated” breech sticker.
Fitting instructions as pdf download.

Pressure settings of the Huma-Air, Bsa Goldstar tuning regulator:
The Huma-Air, Bsa Goldstar tuning regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Due to his length, this reg has a restricted air volume, so this makes it specially suitable for the 12 ft/lbs – 16 Joule versions.
The maximum power of the reg is about 25 ft/lbs – 35 Joule with a 47 cm barrel.
If you are looking for a higher power regulator, please take a look at our high-power internal regulator.

Fitting Instructions: Refer the correct model you have purchased from the below link.
https://www.huma-air.com/Fitting-instructions

If you have any further query about the listed product you can use the above link to “Ask a Question”